Brand: PonicsPumps - PP40006 : 400 GPH, Submersible, Aquaponics/Hydroponics/Fountain/Pond/Aquarium Pump - 6' Cord

Click picture for More Information

Brand: PonicsPumps

Hello website visitors. If you are looking for PP40006 : 400 GPH, Submersible, Aquaponics/Hydroponics/Fountain/Pond/Aquarium Pump - 6' Cord, kindly read the product description and features below. If you feel suitable and would like to purchase this PP40006 : 400 GPH, Submersible, Aquaponics/Hydroponics/Fountain/Pond/Aquarium Pump - 6' Cord, then you can click the picture or the More Information button below to see current price. You can make sure whether this item has the benefit. And finally you are able to buy PP40006 : 400 GPH, Submersible, Aquaponics/Hydroponics/Fountain/Pond/Aquarium Pump - 6' Cord online with easy shipping to your home.

And remember since the best price will not last long. So, check this goods right now and I hope you have got the Special Price.

PP40006 : 400 GPH, Submersible, Aquaponics/Hydroponics/Fountain/Pond/Aquarium Pump - 6' Cord Description:

HOW TO CHOOSE A HYDROPONIC, AQUAPONIC, ALGAPONIC, AQUARIUM, POND OR FOUNTAIN PUMP
First remember:
 • "Maximum Flow Rate" is meaningless because it is at ZERO head.
 • "Maximum Head/Lift" is meaningless because the flow at that height is only a trickle.
You need an affordable quality pump with the desired flow at your required head and lowest wattage.

Step 1: Determining Desired Flow Rate
Most ponics systems flow through a single loop allowing a single pump. A flow rate near 100 GPH is sufficient for grow beds loop up to 120 feet. If you have multiple grow-bed loops, then 100 GPH is needed for each loop. Flood/drain beds needs 2 to 4 cycles per hour.
Step 2: Calculating System Head
Measure the vertical distance from the "top" of the water in the pump tank to the pump discharge pipe. A typical requirement is 100 GPH @ 3 feet.
Step 3: Pump Selection Considerations
 • Continuous vs. intermittent pump duty cycle increases pump life, plus no need for a timer or level control.

PP40006 : 400 GPH, Submersible, Aquaponics/Hydroponics/Fountain/Pond/Aquarium Pump - 6' Cord Product Features:

• PonicsPumps Sells 8 pump sizes. Click on "PonicPumps" below the main page title to see them all.
• FLOW RATES: 396 Gallons Per Hour (GPH) @ 0' Lift; 370 GPH @ 1' Lift; 363 GPH @ 2' Lift; 343 GPH @ 3' Lift; 306 GPH @ 4' Lift; 264 GPH @ 5' Lift; 221 GPH @ 6' Lift; 132 GPH @ 7' Lift Max Lift - 8' 2".
• DIMENSIONS: 3.94" x 2.72" x 3.39".
• 6 FOOT QUALITY CORD: Many pump manufacturers use an inferior quality cord, our highest quality (SJTW) Electric Cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures.
• EPOXY RESIN ENCASEMENT of key internal motor components prevents unwanted conductivity and corrosion of metal parts.
• NEODYMIUM IRON BORON (NdFeB) MAGNETS are used in all our electric motors because they are the most powerful permanent magnetic materials commercially available and increase energy efficiency.
• EASY CLEAN: No tools required to disassemble and clean filter/impeller.
• WATER-LUBRICATED HYDROGENATED NITRILE (HNBR) BEARINGS are used because they possess a very low coefficient of friction, have inherent vibration-dampening qualities and are non-polluting.
• 25 WATTS - 120VAC - 60Hz
• 3 OUTLET ADAPTORS : For 1/2", 5/8" and 3/4" tubing.
• SALT OR FRESH WATER READY!
• ADJUSTABLE INPUT FLOW RATE
• OIL FREE, NO EXPOSED COPPER Safe for fish!
• POLISHED ALUMINUM OXIDE CERAMIC IMPELLER SHAFT insures long pump life. This non-corrodible ceramic shaft is 3 times as hard as stainless steel.
• NO SEAL TO FAIL! Uses wet-rotor design, so no seal to fail that would damage the pump motor.
• LIMITED WARRANTY: 1 Year, only when sold by NicheNOVA.

Find More Information to Get PP40006 : 400 GPH, Submersible, Aquaponics/Hydroponics/Fountain/Pond/Aquarium Pump - 6' Cord